Continuous-Flow Stable Sulfur Isotope Analysis of Organic and Inorganic Compounds by EA-MC-ICPMS.

Elemental analysis (EA) coupled to isotope ratio mass spectrometry (IRMS) is a well-established method to derive stable isotope ratios of sulfur (34S/32S). Conversion of sulfur to SO2 by EA and measurement of SO2 isotopologues by IRMS represents the simplest and most versatile method to accomplish isotope measurement of sulfur even in bulk samples. Yet, interferences by oxygen isotopes in SO2 often impair the precision and trueness of measured results. In the current study, we coupled EA to multicollector inductively coupled plasma mass spectrometry (MC-ICPMS) to establish a method that avoids such interferences due to direct measurement of S+ ions. In addition, measurement of the 33S/32S isotope ratios is possible, thus representing the first bulk method that is suitable to study mass-independent isotope fractionation (MIF). Analytical precision (σ) of available Ag2S and BaSO4 reference materials (RMs) was, on average, 0.2 mUr for δ33S and δ34S, never exceeding 0.3 mUr within this study (1 mUr = 1‰ = 0.001). Measured δ34S values of reference materials agreed within ±0.2 mUr of officially reported values. Measurement of wood samples yielded good precision (0.2 mUr) for sulfur amounts as low as 3.5 µg, but precision deteriorated for samples at lower sulfur contents due to poor peak shape. Finally, we explored cross-calibration of organic liquids separated via gas chromatography (GC) against solid RMs combusted via EA that avoids challenging offline conversion of RMs. Results indicate good precision (≤0.08 mUr) and acceptable trueness (≤0.34 mUr) for determination of δ34S, demonstrating the future potential of such an approach.

Simultaneous Compound-Specific Analysis of δ33S and δ34S in Organic Compounds by GC-MC-ICPMS Using Medium- and Low-Mass-Resolution Modes.

Compound-specific isotope analysis of sulfur (δ34S-CSIA) in organic compounds was established in the last decade employing gas chromatography connected to multiple-collector inductively coupled plasma mass spectrometry (GC-MC-ICPMS). However, δ33S-CSIA has not yet been reported so far. In this study, we present a method for the simultaneous determination of δ33S and δ34S in organic compounds by GC-MC-ICPMS applying medium- and also low-mass-resolution modes. The method was validated using the international isotope reference materials IAEA-S-1, IAEA-S-2, and IAEA-S-3. Overall analytical uncertainty including normalization and reproducibility for δ33S and δ34S was usually better than ±0.2 mUr (σ) for analytes containing at least 100 pmol of S. Further, it is demonstrated that, despite small isobaric interferences, results obtained at low mass resolution are indistinguishable from medium mass resolution offering the benefit of increased sensitivity and versatility of this method. Additionally, the method was applied for the δ33S and δ34S isotope analysis of industrially produced organic compounds to investigate potential mass-independent fractionation (MIF). The relation between δ34S and δ33S in these compounds followed a mass-dependent fractionation trend (MDF; Δ33S ≤ ±0.2 mUr). Degradation of dimethyl disulfide by direct photolysis caused a small but significant MIF (Δ33S = 0.55 ± 0.04 mUr, n = 3), demonstrating sufficient sensitivity of the method for these types of studies.

Isotope fractionation (2H/1H, 13C/12C, 37Cl/35Cl) in trichloromethane and trichloroethene caused by partitioning between gas phase and water.

Transfer of organic compounds between aqueous and gaseous phases may change the isotopic composition which complicates the isotopic characterization of sources and transformation mechanisms in environmental samples. Studies investigating kinetic phase transfer of compounds dissolved in water (volatilization) are scarce, even though it presents an environmentally very relevant phase transfer scenario. In the current study, the occurrence of kinetic isotope fractionation (2H/1H, 13C/12C, 37Cl/35Cl) was investigated for two volatile organic compounds (trichloroethene, TCE and trichloromethane, TCM) during volatilization from water and gas-phase dissolution in water. In addition, experiments were also carried out at equilibrium conditions. The results indicated that volatilization of trichloromethane and trichloroethene from water, in contrast to pure phase evaporation, only caused small (chlorine) or negligible (hydrogen, carbon) isotope fractionation whereas for dissolution in water significant carbon isotope effects were found. At equilibrium conditions, hydrogen and carbon isotopes showed significant differences between dissolved and gaseous phase whereas small to insignificant differences were measured for chlorine isotopes. The results confirm the hypothesis that isotope effects during volatilization of organics from water are caused by transport inhibition in the aqueous phase. The consideration of gas-phase diffusion and vapor pressure isotope effects (Craig-Gordon model) could not reproduce the measured isotopic data. Overall, this study provides an overview of the most common kinetic and equilibrium partitioning scenarios and reports associated isotope effects. As such it illustrates under which environmental conditions isotopic signatures of chlorinated volatile organics may change, or remain constant, during transfer between surface waters and air.

Chlorine Isotope Fractionation of the Major Chloromethane Degradation Processes in the Environment.

Chloromethane (CH3Cl) is an important source of chlorine in the stratosphere, but detailed knowledge of the magnitude of its sources and sinks is missing. Here, we measured the stable chlorine isotope fractionation (εCl) associated with the major abiotic and biotic CH3Cl sinks in the environment, namely, CH3Cl degradation by hydroxyl (·OH) and chlorine (·Cl) radicals in the troposphere and by reference bacteria Methylorubrum extorquens CM4 and Leisingera methylohalidivorans MB2 from terrestrial and marine environments, respectively. No chlorine isotope fractionation was detected for reaction of CH3Cl with ·OH and ·Cl radicals, whereas a large chlorine isotope fractionation (εCl) of -10.9 ± 0.7‰ (n = 3) and -9.4 ± 0.9 (n = 3) was found for CH3Cl degradation by M. extorquens CM4 and L. methylohalidivorans MB2, respectively. The large difference in chlorine isotope fractionation observed between tropospheric and bacterial degradation of CH3Cl provides an effective isotopic tool to characterize and distinguish between major abiotic and biotic processes contributing to the CH3Cl sink in the environment. Our findings demonstrate the potential of emerging triple-element isotopic approaches including chlorine to carbon and hydrogen analysis for the assessment of global cycling of organochlorines.

Transformation of Chlorofluorocarbons Investigated via Stable Carbon Compound-Specific Isotope Analysis.

Compound-specific isotope analysis (CSIA) is a valuable tool in contaminant remediation studies. Chlorofluorocarbons (CFCs) are ozone-depleting substances previously thought to be persistent in groundwater under most geochemical conditions but more recently have been found to (bio)transform in some laboratory experiments. To date, limited applications of CSIA to CFCs have been undertaken. Here, biotransformation-associated carbon isotope enrichment factors, εC,bulk for CFC-113 (εC,bulk = -8.5 ± 0.4‰) and CFC-11 (εC,bulk = -14.5 ± 1.9‰), were determined. δ13C signatures of pure-phase CFCs and hydrochlorofluorocarbons were measured to establish source signatures. These findings were applied to investigate potential in situ CFC transformation in groundwater at a field site, where carbon isotope fractionation of CFC-11 suggests naturally occurring biotransformation by indigenous microorganisms. The maximum extent of CFC-11 transformation is estimated to be up to 86% by an approximate calculation using the Rayleigh concept. CFC-113 δ13C values in contrast were not resolvably different from pure-phase sources measured to date, demonstrating that CSIA can aid in identifying which compounds may, or may not, be undergoing reactive processes at field sites. Science and public attention remains focused on CFCs, as unexplained source inputs to the atmosphere have been recently reported, and the potential for CFC biotransformation in surface and groundwaters remains unclear. This study proposes δ13C CSIA as a novel application to study the fate of CFCs in groundwater.

Isotopic Characterization (2H, 13C, 37Cl, 81Br) of Abiotic Degradation of Methyl Bromide and Methyl Chloride in Water and Implications for Future Studies.

Methyl bromide (CH3Br) and methyl chloride (CH3Cl) significantly contribute to stratospheric ozone depletion. The atmospheric budgets of both compounds are unbalanced with known degradation processes outweighing known emissions. Stable isotope analysis may be capable to identify and quantify emissions and to achieve a balanced budget. Degradation processes do, however, cause isotope fractionation in methyl halides after emission and hence knowledge about these processes is a crucial prerequisite for any isotopic mass balance approach. In the current study, triple-element isotope analysis (2H, 13C, 37Cl/81Br) was applied to investigate the two main abiotic degradation processes of methyl halides (CH3X) in fresh and seawater: hydrolysis and halide exchange. For CH3Br, nucleophilic attack by both H2O and Cl- caused significant primary carbon and bromine isotope effects accompanied by a secondary inverse hydrogen isotope effect. For CH3Cl only nucleophilic substitution by H2O was observed at significant rates causing large primary carbon and chlorine isotope effects and a secondary inverse hydrogen isotope effect. Observed dual-element isotope ratios differed slightly from literature values for microbial degradation in water and hugely from radical reactions in the troposphere. This bodes well for successfully distinguishing and quantifying degradation processes in atmospheric methyl halides using triple-element isotope analysis.

Compound Specific Stable Chlorine Isotopic Analysis of Volatile Aliphatic Compounds Using Gas Chromatography Hyphenated with Multiple Collector Inductively Coupled Plasma Mass Spectrometry.

Stable chlorine isotope analysis is increasingly used to characterize sources, transformation pathways, and sinks of organic aliphatic compounds, many of them being priority pollutants in groundwater and the atmosphere. A wider use of chlorine isotopes in environmental studies is still inhibited by limitations of the different analytical techniques such as high sample needs, offline preparation, confinement to few compounds and mediocre precision, respectively. Here we present a method for the δ37Cl determination in volatile aliphatic compounds using gas chromatography coupled with multiple-collector inductively coupled plasma mass spectrometry (GC-MC-ICPMS), which overcomes these limitations. The method was evaluated by using a suite of five previously offline characterized in-house standards and eight chlorinated methanes, ethanes, and ethenes. Other than in previous approaches using ICP methods for chlorine isotopes, isobaric interference of the 36ArH dimer with 37Cl was minimized by employing dry plasma conditions. Samples containing 2-3 nmol Cl injected on-column were sufficient to achieve a precision (σ) of 0.1 mUr (1 milliurey = 0.001 = 1‰) or better. Long-term reproducibility and accuracy was always better than 0.3 mUr if organics were analyzed in compound mixtures. Standardization is carried out by using a two-point calibration approach. Drift, even though very small in this study, is corrected by referencing versus an internal standard. The presented method offers a direct, universal, and compound-specific procedure to measure the δ37Cl of a wide array of organic compounds overcoming limitations of previous techniques with the benefits of high sensitivity and accuracy comparable to the best existing approaches.

Methyl chloride and methyl bromide emissions from baking: an unrecognized anthropogenic source.

Methyl chloride and methyl bromide (CH3Cl and CH3Br) are the largest natural sources of chlorine and bromine, respectively, to the stratosphere, where they contribute to ozone depletion. We report the anthropogenic production of CH3Cl and CH3Br during breadbaking, and suggest this production is an abiotic process involving the methyl ester functional groups in pectin and lignin structural polymers of plant cells. Wide variations in baking styles allow only rough estimates of this flux of methyl halides on a global basis. A simple model suggests that CH3Br emissions from breadbaking likely peaked circa 1990 at approximately 200tonnes per year (about 0.3% of industrial production), prior to restrictions on the dough conditioner potassium bromate. In contrast, CH3Cl emissions from breadbaking may be of similar magnitude as acknowledged present-day CH3Cl industrial emissions. Because the mechanisms involve functional groups and compounds widely found in plant materials, this type of methyl halide production may occur in other cooking techniques as well.

Vapor Pressure Isotope Effects in Halogenated Organic Compounds and Alcohols Dissolved in Water.

Volatilization causes changes in the isotopic composition of organic compounds as a result of different vapor pressures of molecules containing heavy and light isotopes. Both normal and inverse vapor pressure isotope effects (VPIE) have been observed, depending on molecular interactions in the liquid phase and the investigated element. Previous studies have focused mostly on pure compound volatilization or on compounds dissolved in organic liquids. Environmentally relevant scenarios, such as isotope fractionation during volatilization of organics from open water surfaces, have largely been neglected. In the current study, open-system volatilization experiments (focusing thereby on kinetic/-nonequilibrium effects) were carried out at ambient temperatures for trichloromethane, trichloroethene, trichlorofluoromethane, trichlorotrifluoroethane, methanol, and ethanol dissolved in water and, if not previously reported in the literature for these compounds, for volatilization from pure liquids. Stable carbon isotopic signatures were measured using continuous flow isotope ratio mass spectrometry. The results demonstrate that volatilization of the four halogenated compounds from water does not cause a measurable change in the carbon isotopic composition, whereas for pure-phase evaporation, significant inverse isotope effects are consistently observed (+0.3 ‰< ε < + 1.7 ‰). In contrast, methanol and ethanol showed normal isotope effects for evaporation of pure organic liquids (-3.9 ‰ and -1.9 ‰) and for volatilization of compounds dissolved in water (-4.4 ‰ and -2.9 ‰), respectively. This absence of measurable carbon isotope fractionation considerably facilitates the application of isotopic techniques for extraction of field samples and preconcentration of organohalogens-known to be important pollutants in groundwater and in the atmosphere.

Compound-Specific Stable Carbon Isotope Analysis of Chlorofluorocarbons in Groundwater.

Chlorofluorocarbons (CFCs) and hydrochlorofluorocarbons (HCFCs), controlled substances due to their role in stratospheric ozone loss, also occur as dissolved contaminants in groundwaters. Stable carbon isotopic signatures may provide valuable new information on the fate of these compounds as has been seen for other priority hydrocarbon contaminants, but to date no method for extraction and isotopic analysis of dissolved CFCs from groundwaters has been developed. Here we describe a cryogenic purge and trap system coupled to continuous flow compound-specific stable carbon isotope analysis mass spectrometry for concentrations as low as 35 µg/L. The method is validated by comparing isotopic signatures from water extracted CFCs against a new suite of isotopic CFC standards. Fractionation of CFCs in volatilization experiments from pure-phase CFC-11 and CFC-113 resulted in enrichment factors (ε) of +1.7 ± 0.1‰ and +1.1 ± 0.1‰, respectively, indicating that such volatile loss, if significant, would produce a more (13)C depleted signature in the remaining CFCs. Importantly, no significant fractionation was observed during volatile extraction of dissolved CFCs from aqueous solutions. δ(13)C values for groundwaters from a CFC-contaminated site were, on average, more enriched than δ(13)C values for pure compounds. Such enriched δ(13)C values have been seen in other hydrocarbon contaminants such as chlorinated ethenes and ethanes due to in situ degradation, but definitive interpretation of such enriched signatures in field samples requires additional experiments to characterize fractionation of CFCs during biodegradation. The establishment of a robust and sensitive method of extraction and analysis, as described here, provides the foundation for such future directions.

Compound-specific bromine isotope analysis of methyl bromide using gas chromatography hyphenated with inductively coupled plasma multiple-collector mass spectrometry.

Methyl bromide is the most important natural bromine contributor to stratospheric ozone depletion, yet there are still large uncertainties regarding quantification of its sources and sinks. The stable bromine isotope composition of CH(3)Br is potentially a powerful tool to apportion its sources and to study both its transport and its reactive fate. A novel compound-specific method to measure (81)Br/(79)Br isotope ratios in CH(3)Br using gas chromatography hyphenated with inductively coupled plasma multiple-collector mass spectrometry (GC/MCICPMS) was developed. Sample amounts of >40 ng could be measured with a precision of 0.1‰ (1σ, n = 3). The method results are reproducible over the long term as shown with 36 analyses acquired over 3 months, yielding a standard deviation (1σ) better than 0.4‰. This new method demonstrates for the first time Br isotope ratio determination in gaseous brominated samples. It is three orders of magnitude more sensitive than previously existing isotope ratio mass spectrometry methods for Br isotope determination of other organobromines, thus allowing applications towards ambient atmospheric samples.

Estimating groundwater mixing and origin in an overexploited aquifer in Guanajuato, Mexico, using stable isotopes (strontium-87, carbon-13, deuterium and oxygen-18).

Stable Isotopes (strontium-87, deuterium and oxygen-18, carbon-13) have been used to reveal different sources of groundwater and mixing processes in the aquifer of the Silao-Romita Valley in the state of Guanajuato, Mexico. Calcite dissolution appeared to be the main process of strontium release leading to relatively equal (87)Sr/(86)Sr ratios of 0.7042-0.7062 throughout the study area which could be confirmed by samples of carbonate rocks having similar Sr ratios (0.7041-0.7073). delta(13)C values (-11.91- -6.87 per thousand VPDB) of groundwaters confirmed the solution of carbonates but indicated furthermore influences of soil-CO(2). Deuterium and (18)O contents showed a relatively narrow range of-80.1- -70.0 per thousand VSMOW and -10.2- -8.8 per thousand, VSMOW, respectively but are affected by evaporation and mixing processes. The use of delta(13)C together with (87)Sr/(86)Sr revealed three possible sources: (i) carbonate-controlled waters showing generally higher Sr-concentrations, (ii) fissure waters with low-strontium contents and (iii) infiltrating water which is characterized by low delta(13)C and (87)Sr/(86)Sr ratios. The third component is affected by evaporation processes taking place before and during infiltration which might be increased by extraction and reinfiltration (irrigation return flow).